Product has been added to your basket.
Lubrication UK -

PANEL FILTRATION UNIT

Panel units are ideal for mineral-based industrial fluids in small to medium-sized reservoirs with low flow rates.

Whether you have an application that needs regular filtration, or a maintenance location where you bring equipment to be filtered, Des-Case’s panel units are dedicated filtration systems that can be mounted where you need them most. They are the best choice for improving equipment reliability because they are continuous-duty, “always-on” filtration systems that clean oil and then keep the oil clean.

  • Automatic pressure relief valve
  • Non-bypass filter heads
  • Dual-stage filtration
  • Durable frame with drip pan for direct mounting
  • Industrial powder-coated paint
  • One-year warranty
  • Decontaminating systems
  • Cooling systems
  • Collecting oil samples for analysis

INTENDED USE

  • To be used for offline, secondary filtration and not inline filtration
  • In general industrial environments, both indoors and outdoors (IP rating of 54)
  • For filtering mineral-based industrial oils and most synthetic oils with a maximum operating viscosity range of ISO 680 at 100°F/38°C (3,000 ssu/648cSt) within ambient temperature ranges of -15°F to 150°F (-26°C to 66°C)
  • Placed at the same level or below the equipment being filtered and within reach of the recommended standard 12 foot hoses
  • This system should be stored and used on a level surface, right side up, in a low-traffic area, and connected to the appropriate power source

Operating Temperatures

  • -40°F to 150°F (-40°C to 66°C) for standard unit with clear PVC hoses
  • -20°F to 212°F (-28°C to 100°C) for custom unit with hydraulic hoses and Viton or EPDM seals

Materials

  • Frame: Carbon steel
  • Paint: Industrial powder coat
  • Filter Heads: Aluminum
  • Fittings: Zinc-plated steel and/or brass
  • Pumps: Aluminum/steel
  • Plumbing Hoses: Clear PVC with steel wire
  • Gaskets: Buna-N

Filter Indicators

  • Filter indicator pops at 22 psid (1.55 bar) as warning that filter elements need to be replaced

Pump Relief

  • Opens at 65 psi (5.49 bar)

Weight

  • Approximately 110-135 lbs (50-61 kg). Will vary depending on options selected.

Dimensions

  • 15.6″L x 23.4″W x 25.8″H

Viscosity Range

  • Up to ISO VG 680 at 100°F / 38°C (3000 ssu / 648 cSt)

Replacement Filter Element Part Numbers

PART #DESCRIPTION
FC-AF3-micron Filter Element
FC-BF6-micron Filter Element
FC-CF12-micron Filter Element
FC-DF25-micron Filter Element
FC-JFWater Adsorption Filter Element

Elements are sold in cases of six and can be mixed and matched.

PANEL FILTRATION UNIT CONTACT FORM

    Name *

    person

    Company

    location_city

    Email *

    email

    Telephone

    phone

    Message

    create

    FLUID HANDLING

    ADAPTER KITS

    IsoLink™ Oil Transfer Containers provide the first best practice solution to keep oil clean and dry during oil transfer.

    Lubrication UK -

    ISOLINK OIL TRANSFER CONTAINERS

    IsoLink™ Oil Transfer Containers provide the first best practice solution to keep oil clean and dry during oil transfer.

    Lubrication UK -

    FILTER CART

    Portable filtration units, such as the filter cart, are ideal tools to remediate contaminated systems, flush new equipment during commissioning …